Orangatang Bushings - Nipples

Orangatang Nipples

Designed to provide a lively and energetic ride, Nipples will revitalize any setup for carving, pumping, dancing, freestyle and freeride.

Poured in extremely high rebound Randy Urethane, the Nipples return to their shape fast, which creates a perfect feel for pumping and cruising. They are slightly larger than standard barrel bushings, and there are the bottom and top bushing. The bottom is slightly taller, to make up for carrying most of riders weight.

Recommended weight ranges for lower speed (under 20 mph) riding are below. For faster riding, we recommend going harder.

Nipple bushings fit Paris, Tracker Fastrack, Gullwing Charger II, and old (pre-2010) Bear trucks. They are not compatible with new Bears, Gullwing Chargers, or Indys. Nipples work with Randal trucks, but they do not sit completely contained in the bushing seat. Since the Randal bushing seat is so low, however, it does not interfere with the performance of the bushings. They fit Caliber trucks, but the lean becomes very restricted past a certain point.

Outer diameter: 2.5 cm / 1 inch

Height (top): 1.4 cm / 0.56 inch

COMPATIBILITY

Nipples are NOT recommended for every truck on the market. They work great on Paris V2 and V3, Carver CX and C2, Tracker Fastrack, and Randal reverse-kingpin trucks.

They DO NOT work on any traditional kingpin (street) trucks, such as Independent trucks or Paris Street Trucks.

If your truck is not on this list it may not be compatible, so please check the measurements and compare with your current bushings.